Sensors
The Stripe foil sensor humidity-501 is a foil sensor with electrodes for capacitive humidity measurement. The base material is PET with printed insulation. To evaluate the data, a connection can be established using the humidity 15000-600 device. Alternatively, the data can be evaluated using the ZiF contacting. The contact surfaces are provided with oxidation protection. The specified data refers to the use of the sensor in combination with the device humidity 15000-600. The measuring output will display the wet area in digits.Product includes:1 x Stripe foil sensor moisture-501Datasheet:Factsheet_addsensors_stripe_moisture_S-501.pdf
The Stripe foil sensor pH-303 is a foil sensor with electrodes for electrochemical determination of pH of samples. Our pH-sensor consists of two electrodes (a pH-sensitive and a non-sensitive Ag/AgCl reference electrode) on a transparent PET foil. The readings are taken by measuring the open circuit potential/voltage between both electrodes. Potential (E) and pH have a linear relationship (between the operating range of pH 5.5 to pH 10) so the pH of an unknown analyte solution can be calculated using the pre-determined slope and an offset E value (E0 determined by measuring the potential in a calibration buffer of known pH). The reference electrode and overall sensor can be used in analytes with different chloride concentrations thanks to a solid-state electrolyte layer. Once used, the sensor must be kept hydrated for further application and not allowed to dry out.Product includes:1 x Stripe foil sensor pH-303Datasheet:Datasheet_addsensors_stripe_pH_S-303.pdf
The Stripe foil sensor pH-303 B is a foil sensor with electrodes for electrochemical determination of pH of samples. Our pH-sensor consists of two electrodes (a pH-sensitive and a non-sensitive Ag/AgCl reference electrode) on a transparent PET foil. The readings are taken by measuring the open circuit potential/voltage between both electrodes. Potential (E) and pH have a linear relationship (between the operating range of pH 5.5 to pH 10) so the pH of an unknown analyte solution can be calculated using the pre-determined slope and an offset E value (E0 determined by measuring the potential in a calibration buffer of known pH). The reference electrode and overall sensor can be used in analytes with different chloride concentrations thanks to a solid-state electrolyte layer. Once used, the sensor must be kept hydrated for further application and not allowed to dry out.Product includes:1 x Stripe foil sensor pH-303 BDatasheet:Datasheet_addsensors_stripe_pH_S-303.pdf
The stripe foil sensor Potassium-601 is a foil sensor with electrodes for the electrochemical determination of the potassium value. Our potassium sensor consists of two electrodes (a K-sensitive and a non-sensitive Ag/AgCl reference electrode) on a transparent PET foil. The measured values are determined by measuring the open-circuit potential/voltage between the two electrodes. The reference electrode and the entire sensor can be used with analytes with different chloride concentrations thanks to a solid-state electrolyte layer. After use, the sensor must remain hydrated for further use and must not dry out.To evaluate the data, a connection can be established using our Device ion selectiv D-300. Alternatively, the data can be evaluated using ZiF contacting. The contact surfaces are provided with oxidation protection. The data given refers to the use of the sensor in combination with the device Ion selectivity D-300. The measured potential (in mV) is displayed, or if the sensor is calibrated (one-point software calibration at 21 °C or two-point calibration at other temperatures), the concentration K+ can be output.Product includes:1 x Stripe foil sensor potassium-601Datasheet:Datasheet_addsensors_stripe_potassium_S-601.pdf
The Stripe foil sensor pressure-201 is a foil sensor with an IDES structured layout with resistive force detection. The layout is designed to fit M16 screws. Foil carrier is made of transparent PET material with a printed insulation. A connection between sensor and measurement electronics can be established via our Device Pressure D-200 or ZiF-connector. Contact pads are covered with an oxidation protection. The data given refers to the use of the sensor in combination with the Device Pressure D-200. The measuring output will display the screw force in Ohm.Product includes:1 x Stripe foil sensor pressure-201Datasheet:Factsheet_addsensors_stripe_Screw-force_S-201.pdf
The stripe foilsensor pressure-201 is a foil sensor with an IDES-structured layout with resistive force detection. The layout is designed to accommodate M16 screws. The foil carrier is made of transparent PET material with printed insulation. A connection between the sensor and the measuring electronics can be established via our Device Pressure D-200 or ZiF connector. The contact surfaces are provided with oxidation protection. The specified data refer to the use of the sensor in conjunction with the device pressure D-200. The screw force is displayed in ohms at the measuring output.Product includes:1 x Stripe foil sensor pressure-202Datasheet:Factsheet_addsensors_stripe_Screw-force_S-202.pdf